Vehicle Repair Equipment & Tools

Viktec 33PC Master Bushing Bearing Seal Removal Installation Driver Set Tool Kit

Ningbo Dicong Machinery Co., Ltd.
  • Type:Bushing Bearing
  • Standard:Standard

Base Info

  • Model NO.:VT18179

Description

Basic Info.

Model NO. VT18179

Product Description

This  Master Bushing Driver 33-Piece Set - Metric & Standard SAE Bushing, Bearing, Seal Removal & Installation Tool Kit enables you to remove and install bushings ranging from 10mm to 42mm in diameter and 3/8 inch to 1-3/8 inches in diameter. With this kit, you can complete all of your general pressing needs, install select bushings during a transmission rebuild, freeze plugs, replace a bushing under a rear wheel next to the shock without having to remove the entire knuckle, install pilot bearings, bicycle wheel small sealed bearings, and more. The tool can be reversed to be used as a seal driver but is not recommended for a control arm bushing or other suspension parts. Simply use the different adapters to press (or gently hammer) in/out the bushing/bearing/seal.
  • REMOVE AND INSTALL BUSHINGS: Use the ABN Master Bushing Driver 33-Piece Set - Metric & Standard SAE Removal & Installation Tool Kit on bushings, bearings, and seals ranging from 10mm to 42mm and 3/8 inch to 1-3/8 inch in diameter on your car, truck, farm tractor, lawnmower, construction equipment; Includes large 5.5-inch (14cm), medium 5-inch (12.7cm), and small 4-inch (10.2cm) driver handles with 1.5-inch (3.8cm) knurled ends and O-rings on another end to retain driver; All steel construction
  • EASY TO USE: Simply install a driver (select based on the size of the sleeve that is to be removed and replaced) on the appropriate handle (large side of the driver away from the handle), the larger outer diameter (OD) of the driver will catch the sleeve and pull it through, then tap the handle gently with a hammer
  • VARIOUS SIZES INCLUDED: Metric - 10-12mm, 12-14mm, 14-16mm, 16-17mm, 16-18mm, 18-20mm, 20-22mm, 22-24mm, 25-27mm, 28-30mm, 30-34mm, 32-36mm, 35-40mm, 38-42mm; SAE - 3/8"x7/16", 7/16"x1/2", 1/2"x9/16", 9/16"x5/8", 39/64"x11/16", 5/8"x3/4", 11/16"x13/16", 47/64"x7/8", 13/16"x15/16", 55/64"x1", 15/16"x1-1/16", 1"x1-1/8", 1-1/16"x1-3/16", 1-1/8"x1-1/4", 1-3/16"x1-5/16", 1-1/4"x1-3/8"
  • EASY STORAGE: Heavy-duty 16.5" x 2.75" x 10.5" (41.9cm x 7cm x 26.7cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization; Each piece in this set is permanently laser-etched for sizing and corresponds to labeled carrying case compartment for fast identification
  • CONTENTS: Package includes (30) drivers - 16 SAE standard and 14 metrics, (3) handle rods, and (1) carrying case for your convenience