Factory Directly Sell Auto Car Alloy Wheel Repair Tools
Huzhou Guoneng New Material Co., Ltd.- Type：Transmission Jacks
- Standard：Standard
- Certification：ISO, CE, GS, RoHS
- Tire Gauges Type：Tire Pressure Gauge
- Tire Gauges Carry Way：Embedded
- Condition：New
Base Info
- Model NO.：AG0011BW1B
- Update Method：by Internet
- Shipment：by Sea, Air, Courier Like FedEx, DHL etc.
- OEM：Welcome
- Lifespan：12 Months
- Transport Package：48PCS,Carton
- Specification：34.5x33.5x36.0cm
- Trademark：Visbella
- Origin：Zhejiang, China
- HS Code：3506990000
- Production Capacity：150000 Piece,Pieces Per Month
Description
1 x Silver grey paint (vibration-resistant)
1 x Sandpaper (grit:1000)
1 x Sandpaper (grit:400)
1 x Cleaning cloth
2 x Alcohol prep pads
2 x Plastic spatula
2 x Gloves
Advantage & Features
Permanent
Easy to repair
Heat resistant to 130° C
Added value -Vibration, Carwash resistant
How To Use
Repair Steps:
1. Remove rough edges and unevennesses by grit 400 sand paper .
2. Clean and dry surface with alcohol prep pad and cleaning cloth.
3. Press out both cartridges of the repair adhesive.
4. Mix both components with spatula until you get a consistent grey mass.
5. Use spatula to fill the mass onto damaged area,allow dry for 15-20 minutes.
6. After hardening,use wet sand paper grit 1000 to accommodate the outlines of the repaired surface to get a polished metal surface.
7 &8. Clean and dry the polished area.
9. Apply the lacquer by brush, let the paint dry for at least 1-2 hours before your car, full cure time is 3 days.
Precautions
Flammable & Harmful
Keep out of reach of children
Avoid breathing vapors. Use only in well-ventilated area.
Skin and eye irritant! Wash skin thoroughly with soap and water immediately. In case of eye contact, flush with water for 15 minutes. If irritation, consult a doctor.
Production Line
Company Overview
Zhejiang Guoneng Technology Co., Ltd was establish from 1992. Over 20 years professional manufacture experience, we become one of the largest Manufacture on Adhesive in Huzhou City Zhejiang China.
Our company covers an area of 22,000 square meters, including 800 square meters of laboratory and we have over 200 employees. We specialize in the production and distribution of adhesive products,and they're well approved by SGS, Reach, RoHs, BSCI, ISO9001:2000 etc. OEM and ODM are both welcomed.
We'd like to cooperate with customers from all over the world based on mutual-benefit. We always put "Customers First" in our mind and commit ourselves to providing high quality HPPP (Honest, Prompt, Precise, Professional) service to all reliable and esteemed international partners and clients.
Certificates
After-Sales Service
Reply within 24 Hours
Professional consultation service is available within 24 hours after receiving your feedback regarding theiterms
that that you bought.
Global Insurance Service
Global insurance service guarantees the safety of iterms when installation and application.
Compensation Policy
Any quality problem caused by our company side with enough evidence, we promise you that if could bere-produced for free.
Contact us, you will get more than what you see !