• Type：Diagnostic Scanner
• Transport Package：Carton Box
• Specification：23cm*21cm*7cm
• Origin：China

Basic Info.

Type Diagnostic Scanner Transport Package Carton Box Specification 23cm*21cm*7cm Origin China

Product Description

V2022.03 Mercedes Benz C6 OEM DoIP Xentry Diagnosis VCI Multiplexer with Software HDD No Need Activation

Mercedes Benz C6 OEM Xentry diagnosis VCI DoIP Pass thur interfac is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the XENTRY software loaded on a PC.

Notice:
If you choose hardware and software(500G HDD or SSD)
1. Please install the 500GB HDD(SSD) on laptop above 4GB Memory and I5 CPU, and use it on one laptop only.
2. There is keygen in our software HDD(SSD), no need activation by us.
3. This Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 can't support All Key Lost,needs one key at least.

 

WIFI PASSWORD : 12345678

 

Please pay attention :

 

This device cant work with C4 or C5 software , only can use our C6 software , if you dont have software , please buy our software together when you make the order

 

MB Star C6 Software Description:
1.DAS / Xentry 2022.03
2.WIS net 2019.07
3.EPC net 2018.12: Electronic Parts Catalog
4.ST Finder 2016: optional: a Part location finder
5.SDmedia 2015.01
6.DTS 8.14.016 Monaco
7.VX Manager 1.4.2
8.Vediamo Database (This C6 hardware not support Vediamo)

 

 

What is DOIP?

DOIP is ISO 13400 diagnostic protocol

 

ISO 13400-1:2011 describes the general use cases and communication scenarios which are covered by an Internet Protocol-based vehicle communication standard. Each use case drives specific communication capabilities of the vehicle communication interface, for instance in order to be interoperable in an existing computer network.

 

The diagnostic communication over Internet Protocol (DoIP) protocol supports the standardized service primitive interface as specified in ISO 14229-2.

 

The descriptions in ISO 13400-1:2011 cover different application layer implementations, such as:

enhanced vehicle diagnostics (system diagnostics beyond legislated functionality, non-emissions-related system diagnostics);

WWH-OBD (World-Wide Harmonized On-Board Diagnostics) as specified in ISO 27145-2 and ISO 27145-3.

 

The mercedes Land Rover JLR all use this new Diagnostic Protocol now.
 

 

Where do you need DOIP device?

when we test mercedes new car like w222 w205

In AudioComand section you can find DoIP test page.
If cable is DoIP you will see green mark that DEVICE is Ok.
Xentry will prompt you that other device must carry yellow marks.
 

Mercedes Benz VCI DoIP C6 Features:

Support all model series of For Mercedes Benz
Support DoIP, cover more functions during SCN Coding than SD C4/C5
Diagnosis updates no longer necessary - firmware updates required on rare occasions
Does not need a power supply unit for external power supply
Dandy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)

Mercedes Benz VCI DoIP C6 Support Functions List:

Diagnosing
Programming
Smulation studying
Repair information
Automotive maintenance
Technical service bulletin
DPF Regeneration (work same as original)

DPF Regeneration menu lets you perform the DPF cleaning to clear the blockage through continuous burning of the particulates captured in the DPF filter. Which will avoid the filter being blocked by ash, then the owner has to replace the new diesel particulate filter (worth 1000usd -200usd)
 

Mercedes Benz VCI DoIP C6 Support Systems:

Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM's
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Instrument Cluster
Tyre Pressure Control
Parktronic System
Keyless Go
D2b Command & Audio Gateway (D2B and MOST networks)
TV Tuner
Headlamp Range Adjustment
Seat Electronics
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
Assyst & ASSYST + systems

 

Mercedes Benz Xentry diagnosis VCI DoIP Pass thur interface C6 Summary:

Mercedes Benz Xentry diagnosis VCI DoIP Pass thur interface C6 (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.
The Mercedes Benz Xentry diagnosis VCI DoIP Pass thur interface C6 does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.

How to Use Mercedes Benz VCI DoIP C6?

1. Please install the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only. If change laptop, software may get broken and need to ship HDD back to us to copy software again.
2. There is keygen in our software HDD, no need activation by us.
3. This Mercedes Benz Xentry diagnosis VCI DoIP Pass thur interface C6 can't support All Key Lost,needs one key at least.

Mercedes Benz VCI DoIP C6 Package List:

1 pc x Mercedes Benz VCI DoIP C6 main Unit
1 pc x OBD cable
1 pc x USB cable
1 pc x Etherent cable
1 pc x Software HDD