Title: How to cut off power to a car
During daily use or maintenance, cutting off power to the vehicle is a common operation. Whether you are replacing the battery, repairing the circuit, or parking the vehicle for a long time, cutting off the power can avoid the risk of power loss or short circuit. The following is a compilation of content related to vehicle power outages that have been hot topics on the Internet in the past 10 days, as well as detailed operation guides.
1. Hot topics and content on the entire network in the past 10 days
Ranking | hot topics | Discussion popularity | Related content |
---|---|---|---|
1 | How to maintain a vehicle parked for a long time | high | Power off operation, battery maintenance |
2 | Things to note when powering off new energy vehicles | middle | High voltage system power outage steps |
3 | Steps for powering off traditional fuel vehicles | high | Battery disassembly and tool selection |
4 | Vehicle data loss problem after power outage | Low | How to reset trip computer |
2. Common reasons for vehicle power outages
1.Long-term parking of vehicles: Prevent battery loss and extend service life.
2.Repair circuit or replace battery: Ensure safe operation and avoid short circuit.
3.Anti-theft requirements: Some car owners reduce the risk of vehicle theft by cutting off power.
4.Reset trip computer: Solve some electronic system failures.
3. Steps to cut off power for traditional fuel vehicles
1.Preparation tools: Usually a wrench or socket is required (size depends on battery model).
2.Turn off vehicle power: Turn off the engine and remove the key, and make sure all electrical devices are turned off.
3.Disconnect the negative terminal: Prioritize the removal of the negative pole (black terminal) to avoid short circuit.
4.Disconnect the positive terminal: If you need to completely cut off the power, then remove the positive terminal (red terminal).
5.Check battery status: Can be used to clean battery terminals or measure voltage.
4. Precautions for power outage of new energy vehicles
Because new energy vehicles involve high-voltage systems, the power-off operation is more complicated, and it is recommended to be completed by professionals. Here are the key considerations:
step | Operation content | Risk warning |
---|---|---|
1 | Turn off the vehicle and remove the key | Make sure the high voltage system is dormant |
2 | Disconnect the negative terminal of the low voltage battery | Need to wait for more than 5 minutes before operating the high-pressure system |
3 | High voltage system power outage (professional operation) | Non-professionals are prohibited from disassembling high-voltage components |
5. Common problems and solutions after power outage
1.Trip computer data lost: Some vehicles need to reset time, throttle and other parameters.
2.Anti-theft system lock: You may need to enter a password or contact the 4S store to unlock.
3.Battery terminal corrosion: After power outage, clean the terminals and apply Vaseline to prevent oxidation.
6. Summary
Cutting off power to a vehicle is a practical operation, but the correct method needs to be chosen according to the vehicle model (fuel vehicle/new energy vehicle). There are great risks when non-professionals operate the high-voltage system of new energy vehicles, so be careful. If any abnormality occurs after a power outage, it is recommended to contact the repair shop in time.
Through the above structured data and step analysis, we hope to help car owners complete the vehicle power-off operation safely and efficiently.
check the details
check the details