How to adjust the left and right rearview mirrors in Section 2
In the subject two exam, the adjustment of the rearview mirror is one of the key steps to ensure driving safety. The correct angle of the rearview mirror can help students accurately judge the distance between the car body and the sideline to avoid pressing or scratching the line. The following is a collection of popular discussions and structured data on rearview mirror adjustment in the past 10 days across the Internet to help you quickly master the skills.
1. The core points of adjusting the left and right rearview mirrors
| Rear view mirror type | Adjustment standards | function |
|---|---|---|
| left rearview mirror | The horizon is located at 1/2 of the mirror surface, and the car body occupies 1/4 of the mirror surface. | Observe the distance between the left rear wheel and the sideline |
| right rearview mirror | The horizon is located at 2/3 of the mirror surface, and the car body occupies 1/5 of the mirror surface. | Observe the position of the right rear wheel and the rear corner |
2. Step-by-step adjustment method
Step 1: Adjust the seat after getting in the car
Adjust the rearview mirror after the seat position is fixed to avoid viewing angle deviation caused by changes in sitting posture.
Step 2: Left rearview mirror adjustment
Sit upright, press and hold the adjustment button with your left hand, and stop when you see the left rear wheel and door handle.
| Common mistakes | Correct operation |
|---|---|
| Body proportions are too large | Reduce body display to 1/4 mirror |
| Too little floor space | Press down on the lens to center the horizon |
Step 3: Adjust the right rearview mirror
Special attention needs to be paid to the library angle observation. It is recommended to tilt the lens downward about 30 degrees.
3. Adjustment differences for different projects
| Exam items | Left rearview mirror focus | Right rearview mirror focus |
|---|---|---|
| Reversing into storage | Observe the left rear wheel and the stock line | Keep an eye on the right corner |
| Side parking | Look at the left rear wheel contact dotted line | Observe that the right front corner disappears |
4. Answers to high-frequency questions (hot discussions in the past 10 days)
Q1: Adjust the rearview mirror to the lowest or highest position?
Adjust according to height: It is recommended to adjust it to the lowest level if you are under 160cm, and you can raise it appropriately if you are over 170cm.
Q2: What is the difference between electric adjustment and manual adjustment?
Electric adjustment requires turning on the vehicle's power supply, while manual adjustment requires pressing the edge of the lens directly.
| Adjustment method | Time consuming | Accuracy |
|---|---|---|
| Electric adjustment | about 30 seconds | Can be fine-tuned |
| Manual adjustment | about 15 seconds | Need to confirm repeatedly |
5. Special reminder from coach
1. The rearview mirror of the test car may be smaller than that of the training car. It is recommended to simulate and adapt in advance.
2. You need to readjust the angle of the rearview mirror when wearing thick-soled shoes.
3. On rainy days, you need to wipe the mirror surface before adjusting it.
6. Statistics (driving test guide 10-day sampling)
| Error type | Proportion | Consequences |
|---|---|---|
| Right mirror too high | 43% | Can't see the right corner |
| Left mirror too far | 32% | Misjudgment of sideline distance |
| The double mirror is not reset | 25% | Influence the next project |
After mastering these adjustment skills, it is recommended to fix your rearview mirror parameters during training to form muscle memory. Before the exam, you can take a photo of the successfully adjusted angle with your mobile phone as a reference. Remember: a good start is half the battle. Accurate rearview mirror adjustment can lay a solid foundation for the subject two exam.
check the details
check the details
en
